A proven exposed-fastener steel panel system offering exceptional durability and longevity, the most affordable way into metal roofing without sacrificing long-term performance.
*Proposal delivered by end of business on the second business day after your in-home inspection, or we apply a $1,000 credit to your contract. Price lock excludes rotted or damaged decking discovered during tear-off.
Prefer to talk or text? (817) 382-3338 · Text
Get your estimate range in under 60 seconds.
R-panel is our most affordable way into metal roofing, built to last far longer than asphalt shingles.
We install both. Here's how we actually think about which one fits a given home, not a sales pitch for either.
You want the lowest cost per square foot of any metal roofing system, and you don't need the fully concealed fastener line standing seam offers. It's a genuine, durable metal roof at the most accessible price point.
You want a longer lifespan (50–70 years vs. 40–60) and zero exposed fasteners, and the higher per-square-foot cost fits your budget. See the full standing seam guide →
R-panel runs $7–$11/sq ft installed, the most affordable metal system we offer. Installed cost by material, based on current DFW-wide market rates.
| Material | $ / Sq Ft Installed* |
|---|---|
| R-Panel / Exposed-Fastener Steel | $7–$11 |
| Stone-Coated Steel | $10–$16 |
| Standing Seam Steel | $12–$18 |
| Premium 24-Gauge Standing Seam | $15–$22+ |
| Brava Synthetic Slate (Composite) | $18–$22 |
| Copper | $25–$40+ |
*Rates are per sq ft of gross roofing material, which includes waste and overage (typically 10–30% depending on material and roof complexity). Get an estimate for your exact roof with our free visualizer.
DFW-wide installed-cost ranges as of 2026, for material and labor combined. Actual cost depends on your roof's exact size, slope, tear-off needs, and site conditions.
Metal and Brava synthetic roofing is all we install. From a 40-point inspection to drone footage of your finished home, every step is handled for you, and backed in writing.
Decking, flashing, ventilation, attic, and every penetration, documented.
Your proposal within 2 business days of your inspection, or we credit you $1,000.*
Your contract price is your final price.*
Samples, color chips, and spec sheets, prepared and submitted to your HOA when approval is required.
We pull every required permit.
Gutters and yard cleared of all debris, down to the last nail.
With a transferable certificate for your buyer, plus the manufacturer's material warranty registered in your name.
We file your Class 4 certificate with your insurer.
Before-and-after drone footage, ready to use when you list.
Decking integrity, rafter/truss condition, slope verification, load capacity for your chosen system.
Valley, chimney, and skylight flashing, drip edge, step flashing, pipe boots, sealant condition.
Ridge and soffit vent function, attic moisture and insulation, airflow balance.
Solar mounts, satellite brackets, HVAC lines, electrical mast, plumbing vents, skylights.
Gutters, downspouts, fascia, soffits, roof-to-wall transitions, ponding risk.
Satellite aerial measurement, wind/hail rating compliance, HOA material review, permitting.
We install R-panel metal roofing throughout the Dallas–Fort Worth Metroplex. Find your city below.
R-panel is an exposed-fastener metal roofing system, ribbed steel panels installed with screws driven directly through the panel face. It's a proven, straightforward system widely used on both residential and agricultural buildings across Texas.
Yes. The tradeoff versus standing seam is the exposed fastener pattern, not the underlying durability of the steel.
R-panel is the most affordable metal roofing system we install, running about $7–$11 per square foot installed in the Dallas–Fort Worth market. Your exact number depends on roof size, pitch, and complexity, request a free estimate for your specific home.
No. Lighter and reflective finishes can reduce heat gain, so color choice matters more than the metal itself. R-panel comes in a range of colors, and we can help you choose one that suits your home and climate.
A quick call with our team is the fastest way to find out if R-panel is the right fit for your home and your budget, no pressure, no obligation.
Proposal within 2 business days of your inspection, or we credit you $1,000.*