Synthetic slate roofing for DFW homeowners who want a traditional, dimensional roofline — without real slate's weight, fragility, or cost.
We install Brava composite roofing — Spanish Barrel Tile, Cedar Shake, and Slate — the manufacturer behind the synthetic profiles on this page.
Real slate has always been one of the most beautiful roofing materials — and one of the most impractical. Synthetic slate exists to solve that.
We install Brava composite roofing exclusively for synthetic slate and tile — here's what each profile actually looks like on a roof.
A rounded, high-relief barrel profile that reads as authentic clay tile from the curb — popular on Mediterranean, Spanish Colonial, and Tuscan-style homes across DFW. Comes in tones like Aged Mission and Tuscan Clay.
A deeply textured, hand-split shake profile for homeowners who want a rustic, natural-wood look without cedar's fire risk, rot, or ongoing upkeep. Comes in tones like Aged Cedar and Natural Cedar.
A crisp, dimensional slate profile — the closest match to authentic quarried slate — suited to historic-style, French Country, and traditional architecture. Comes in tones like Arendale and Onyx.
All three Brava profiles — Spanish Barrel Tile, Cedar Shake, and Slate — are live in our Free Roof Visualizer, so you can see each one rendered on your own home before you decide.
See it on your home →We vet every manufacturer we install. Here's specifically what earned Brava a place in our lineup, not just a name on a brochure.
Brava composite tiles are wind-tested to withstand up to 188–211 mph with proper fastening — well beyond what many other synthetic tile manufacturers rate their composite profiles for. That matters here: North Texas sees serious straight-line wind and severe thunderstorm events alongside its hail seasons, and a roof rated for a fraction of that speed is a real long-term risk, not just a spec-sheet number.
Select Brava shake and slate lines carry a standalone Class A fire rating — the highest available — without requiring the specialized, costly fire-retardant underlayment system some competing composite products need to hit the same rating. That's a real difference in install cost and complexity, not just a certification footnote.
Brava tiles are compression-molded from actual natural wood shake and slate masters, capturing deep surface ridges and irregular, rustic edges that read as genuinely handmade rather than stamped. Color runs through the full thickness of each tile — through-body mineral coloration — so a scratch or chip exposes more of the same color underneath, not a mismatched substrate the way surface-treated alternatives can show.
Brava's composite is lighter per square than some heavy-duty slate alternatives, reducing the load on older roof decks that were never engineered for real slate's weight. Brava also makes a genuine composite Spanish barrel tile profile with high-wind and Miami-Dade approvals — a traditional tile silhouette not every composite manufacturer offers.
We install both. Here's how we actually think about which one fits a given home — not a sales pitch for either.
You want the longest possible lifespan (standing seam runs 50–70 years), the strongest available insurance discounts, and a clean, modern architectural line. Metal is the higher-durability, higher-savings choice over a 20–30 year horizon.
Your home's architecture or your HOA's design guidelines call for a traditional, dimensional slate profile specifically — and you want that look without real slate's weight, fragility, or maintenance. Synthetic slate is still a genuine upgrade over asphalt, just a different tradeoff than metal.
Synthetic slate lands mid-pack — more than exposed-fastener metal, comparable to standing seam, well below real slate or copper. Installed cost by material, based on current DFW-wide market rates.
| Material | $ / Sq Ft Installed | Est. Total (3,500 Sq Ft Roof) |
|---|---|---|
| R-Panel / Exposed-Fastener Steel | $7–$11 | $24,500–$38,500 |
| Stone-Coated Steel | $10–$16 | $35,000–$56,000 |
| Standing Seam Steel | $12–$18 | $42,000–$63,000 |
| Premium 24-Gauge Standing Seam | $15–$22+ | $52,500–$77,000+ |
| Synthetic Slate (Composite) | $12–$20 | $42,000–$70,000 |
| Copper | $25–$40+ | $87,500–$140,000+ |
DFW-wide installed-cost ranges as of 2026, for material and labor combined. Sample totals assume a 3,500sq ft roof with typical pitch and access — actual cost depends on your roof's exact size, slope, tear-off needs, and site conditions. Get a free satellite-based estimate for your home's specific number.
We install three Brava composite profiles: Brava Spanish Barrel Tile (a rounded clay-tile profile for Mediterranean and Spanish Colonial-style homes), Brava Cedar Shake (a textured, hand-split wood-shake look without the fire risk or upkeep of real cedar), and Brava Slate (a crisp, dimensional profile that's the closest match to authentic quarried slate). Each comes in a range of factory colors — we'll walk through samples for your specific home during your free consultation.
We selected Brava after evaluating the composite tile market on wind performance, fire rating, and texture realism. Brava tiles are wind-tested up to 188–211 mph with proper fastening — beyond what many other synthetic tile manufacturers rate their composite profiles for — and select Brava shake and slate lines carry a standalone Class A fire rating without requiring the specialized fire-retardant underlayment some competing composite products need to hit the same rating. The compression-molded texture and through-body color also hold up to chips and scratches better than surface-treated alternatives. It's the combination that made Brava our standard, not any single spec.
Synthetic slate typically runs a fraction of real slate's installed cost. Real slate requires specialized installers, structural reinforcement for the extra weight, and slate itself is one of the most expensive roofing materials available. Synthetic slate delivers a comparable look at a cost much closer to premium metal or high-end stone-coated steel — we'll give you an exact number for your home during your free consultation.
Most synthetic slate systems carry manufacturer warranties in the 40–50 year range, with the material engineered to resist cracking, fading, and impact damage over that span. That falls short of standing seam metal's 50–70 year lifespan, but it's well beyond asphalt shingles and far more durable than real slate, which is prone to cracking underfoot and in hail regardless of its long theoretical lifespan.
Synthetic slate is engineered to be lightweight — typically comparable to or only slightly heavier than asphalt shingles, and it doesn't require the structural reinforcement real slate often demands. That makes it a viable option on homes where authentic slate was never structurally practical.
It depends on what you're optimizing for. Standing seam metal offers the longest lifespan, the strongest insurance discounts, and a cleaner architectural line. Synthetic slate offers a traditional, dimensional profile that some HOAs and historic-style homes call for specifically, in a system still built for North Texas hail. We install both, and we'll tell you honestly which one fits your home and your HOA's guidelines — not just push whichever is easier to sell.
Many carriers offer premium discounts for Class 4 impact-rated roofing, and synthetic slate systems are commonly rated Class 4 — but discount programs vary by carrier and aren't always as deep as the discounts available for standing seam metal. We'll walk through what your specific carrier offers for each material during your consultation.
Synthetic slate installed cost runs about $12–$20 per square foot in the Dallas–Fort Worth market, landing between exposed-fastener metal and copper on the price spectrum — roughly comparable to standing seam steel. On a representative 3,500 sq ft roof, that works out to about $42,000–$70,000 installed. Your exact number depends on roof size, pitch, and complexity — request a free estimate for your specific home.
We install synthetic slate roofing throughout the Dallas–Fort Worth Metroplex. Find your city below.
A quick call with our team is the fastest way to find out. We'll talk through your home, your HOA's guidelines if you have one, and give you an honest read on which material actually fits — no pressure, no obligation.