Hidden fasteners, a clean architectural line, and a 50–70 year lifespan. The system luxury homebuilders and architects across DFW specify by default.
*Proposal delivered by end of business on the second business day after your in-home inspection, or we apply a $1,000 credit to your contract. Price lock excludes rotted or damaged decking discovered during tear-off.
Prefer to talk or text? (817) 382-3338 · Text
Get your estimate range in under 60 seconds.
Exposed-fastener metal roofing (like R-panel) is a proven, affordable system. Standing seam solves the one thing exposed fasteners can't.
We install both. Here's how we actually think about which one fits a given home, not a sales pitch for either.
You want the longest-lasting steel roof (50–70 years), the cleanest modern architectural line, and zero exposed fasteners. It's the flagship choice for luxury builds and homeowners optimizing for permanence.
Your HOA's design guidelines call for a traditional shingle or tile profile, or you want the strength of steel at a lower cost than standing seam. Still Class 4 hail-rated, just a different architectural statement.
Standard standing seam runs $12–$18/sq ft installed; premium 24-gauge runs $15–$22+/sq ft. Installed cost by material, based on current DFW-wide market rates.
| Material | $ / Sq Ft Installed* |
|---|---|
| R-Panel / Exposed-Fastener Steel | $7–$11 |
| Stone-Coated Steel | $10–$16 |
| Standing Seam Steel | $12–$18 |
| Premium 24-Gauge Standing Seam | $15–$22+ |
| Brava Synthetic Slate (Composite) | $18–$22 |
| Copper | $25–$40+ |
*Rates are per sq ft of gross roofing material, which includes waste and overage (typically 10–30% depending on material and roof complexity). Get an estimate for your exact roof with our free visualizer.
DFW-wide installed-cost ranges as of 2026, for material and labor combined. Actual cost depends on your roof's exact size, slope, tear-off needs, and site conditions.
Metal and Brava synthetic roofing is all we install. From a 40-point inspection to drone footage of your finished home, every step is handled for you, and backed in writing.
Decking, flashing, ventilation, attic, and every penetration, documented.
Your proposal within 2 business days of your inspection, or we credit you $1,000.*
Your contract price is your final price.*
Samples, color chips, and spec sheets, prepared and submitted to your HOA when approval is required.
We pull every required permit.
Gutters and yard cleared of all debris, down to the last nail.
With a transferable certificate for your buyer, plus the manufacturer's material warranty registered in your name.
We file your Class 4 certificate with your insurer.
Before-and-after drone footage, ready to use when you list.
Decking integrity, rafter/truss condition, slope verification, load capacity for your chosen system.
Valley, chimney, and skylight flashing, drip edge, step flashing, pipe boots, sealant condition.
Ridge and soffit vent function, attic moisture and insulation, airflow balance.
Solar mounts, satellite brackets, HVAC lines, electrical mast, plumbing vents, skylights.
Gutters, downspouts, fascia, soffits, roof-to-wall transitions, ponding risk.
Satellite aerial measurement, wind/hail rating compliance, HOA material review, permitting.
We install standing seam metal roofing throughout the Dallas–Fort Worth Metroplex. Find your city below.
Standing seam panels interlock via a raised, hidden-fastener seam, no exposed screws penetrating the panel face anywhere on the roof. That's the main thing that separates it from exposed-fastener systems like R-panel: nothing to back out, corrode, or leak over time, and a cleaner, unbroken architectural line.
Standing seam is the longest-lived steel roof we install, typically 50 to 70 years, versus 40–60 years for exposed-fastener metal and 15–20 years for asphalt shingles. Most DFW homeowners who install standing seam never replace a roof again.
Yes, standing seam carries a Class 4 impact rating, and most Texas insurers discount Class 4 roofs. Savings vary by carrier and policy, so check with your insurance carrier before you decide. We can supply product documentation for your agent.
Most DFW-area HOAs approve standing seam in neutral or earth-tone colors. Charcoal gray, bronze, and true black are the most commonly approved. We provide material samples, color chips, and manufacturer spec sheets to support your HOA submission at no additional cost.
Standard standing seam runs about $12–$18 per square foot installed in the Dallas–Fort Worth market, with premium 24-gauge panels at $15–$22+. Roof size, pitch, and complexity set the final figure, and a free estimate gives you a number for your own house.
Standing seam carries a Class 4 impact rating, but very large hail can still leave cosmetic marks on some metal finishes. Smooth panels show marks more readily than textured stone-coated steel, so finish and profile matter. If that concerns you, ask about textured options during your inspection.
Metal expands and contracts with temperature, and proper fastening and a well-designed panel system keep that movement controlled. We do not promise silence, but a careful installation keeps noise minimal. Ask us what to expect for your roof.
Oil canning is a slight visible waviness that can appear on flat metal panels. It is cosmetic and does not affect how the roof performs. Panel choice and installation help reduce it, though we cannot promise it will not show in certain light.
A quick call with our team is the fastest way to find out if standing seam is the right fit for your home, no pressure, no obligation.
Proposal within 2 business days of your inspection, or we credit you $1,000.*